Solar Tracker MINI, powered by two engines one for tilt and one for horizontal rotation with this system turns can make 380, and controller TABLE INVERTER input 220V (F, N) Output 220V Three phase (R, S; T). The movements do so on time for both engines with engine turns energy independent 220V three phase motors. Capacity plates 8 or 10, 190Watios peak plate, reduced dimensions, 8 plates 9120Wd 1500Wh 6 hours Day, 10 plates 6 hours Day 1.900 11.400 Wh Wd. Note: The MINI Solar Tracker consists only of the structure or foot, emparrillad, motors, INVERTER TABLE, and Base with Built-in threaded Barrilla foundation. NOT INCLUDED photovoltaic plates, wiring, junction boxes or connections. Measurement: 12.8 square meters the gridiron. 

GPF58T module with 58 channel transmitters / push buttons

This manual provides specific, necessary information, knowledge of the product you own. It should be read carefully before unpacking the equipment and whenever breakdowns or maintenance arise. In the event of use, repairs or modifications by non-certified personnel, the calubert warranty is exempt from any liability for damages resulting from misuse for which the product was created. Calubert disclaims any liability for damages arising from the product.

Custom manufacturing for your company or for your clients (only for professionals).

Three-phase gear motor at 400/240 vol. For intensive use in various applications. Flame retardant, ideal for turntables, twist packers, for facing pallets in tight spaces etc. Prepared to put it in a pit. Drag of 2,500 kilos. Without blocking.

GP1CV

BUILT-IN REDUCING MOTOR FOR USE OF ROTATING PLATFORMS. 2500kilos of drag Without Locking

Cabinet with 58-channel function receivers. NOTE: this cabinet works together (GPF58T).

Steam generator

Steam generator this generator is full of distilled water that has two holes (through both holes are distilled water inlet and steam or mist outlet) that connect to the expansion bottle that has a maximum and minimum water level that will always be To be respected for its perfect steam production operation, above the maximum level there is a chamber in said chamber to store the mist or steam cooled by the water, remaining to be absorbed by the filter. The expansion bottle has a safety cap, it has an outlet at the top that steam will exit through the inlet (the filter has an inlet and an outlet must be respected) to a particle filter and water retention ( If there were) steam leaving the filter outlet and entering the vehicle intake.

COMPRESSOR

For motors Up to 3Hp 2200W; With Phase and Neutral (Mono-fasic), converts it to Triphasic (R, S, T)

COMPRESSOR -Inverter Frame Functions for an Automatic-total Compressor Motor without boiler (note: avoid placing boilers or if boiler cannot be dispensed with they will be much smaller in size, with internal limit switches, NOTE: the internal limit switches are by ammeter if the Compressor was in bad condition, the internal limit switches would act if this happens, the compressor will have to be corrected (it happens for security that would act not to cause breakdowns) with optional receiver card and emitter, with potentiometer to give more air flow or pressure.

GPCCI2M

For motors Up to 3Hp 2200W; With Phase and Neutral (Mono-fasic), converts it to Triphasic (R, S, T)

-Functions for Skylights of a Motor and Compressor, man present with slowdown and anti-crushing in closing and opening, with Radar, limit switches by external inputs, internal limit switches, and closing maneuver if there was no electrical power. NOTE: the internal limit switches are by ammeter if the automation or the Skylight is in bad condition the internal limit switches will act if this happens, the Skylight will have to be corrected (this happens for safety that would act as anti-crushing) with an optional receiver card and emitter, opening button,

Do not hesitate to contact to offer more information

GPBCKUP

For motors Up to 3Hp 2200W; With Phase and Neutral (Mono-fasic), converts it to Triphasic (R, S, T)

Control panel with inverter, inverter box, charger, PVM input (Photoelectric plates) Photoelectric plates not included, external network input, generator set input, group of batteries (battery groups can be placed according to need), the group that is designed for this equipment is 12VDc 134Am, with the system it has in place for maximum energy saving it is one minute of operation, at the end of the minute the equipment will turn off and wait for the operation command. This table has the characteristics of securities.

Structure of solar tracker capacity 8 or 10 photovoltaic panels, with 2 motors and controller

Structure only No motors or controller