GP46VDC Power supply DPS Constant voltage / current

GP46VDC Power supply DPS Constant voltage / current

Basic functions

Keyboard + encoder potentiometer combination adjustment 2.4 inch HD color screen Special battery charging interface Quick data storage and retrieval New PC software Wi-Fi connection, phone APP control-Out of PWM pulse and dutyCicle (adjustable Duty 100%)

Function:
 
1. Electrical parameter measurement function (voltage, current, active power, energy).
2. Voltage alarm function (over voltage alarm threshold, backlight and flashing voltage for alarm).
3. The power key reset function.
4. Store data when power off.
5. Large LCD display (display voltage, current, active power, energy at the same time)
6. Backlight function.

Display format:
 
1. Power: test range: 0 ~ 120W
Within 1KW, the display format is 0.0 ~ 999.9W;
1KW and above, the display format is 1000 ~ 2000W.
2. Power: test range: 0 ~ 120Wh
Within 10KWh, the display format is 0 ~ 9999Wh;
10kWh and above, the display format is 10 ~ 9999kWh.
3. Voltage: test range: 6.5 ~ 100V
Display format: 6.50 ~ 99.99V
4. Current: test range: 0 ~ 20A
Display format: 0.00 ~ 20.00
 
Wrench
1. backlight control
Short press the key to turn the backlight on or off, the backlight has memory function, it can store the power on or off status when power off.
 
2 restart power
Step 1: Hold down the key until the power display area shows "CLr", then release the key.
Step 2: At this time, the power flashes to indicate that this is the power reset state, if you short press the key again, the power value is cleared and exits the flashing reset state.
Step 3: If there is no operation in 5 seconds, it means the power value is not cleared and it will exit the reset state.
 
3. Set voltage alarm threshold
Step 1: Press and hold the key until the power display area shows "SET", then release the key.
Step 2: After entering this state, the voltage area shows the current value of the high voltage alarm, the current area shows the current value of the low voltage alarm, and the last digit starts flashing, then you can short press to plus 1, when there is no operation for 3 seconds, it will change the digit position automatically, from the high voltage alarm value to the low voltage alarm value, there are a total of six digits, the range of the voltage alarm threshold it is 6.5 ~ 99.9V;
Step 3: After finishing the setting, long press the key until the screen shows "PASS", that means you set up successfully and it will exit the setting state automatically.
 
Precautions:
 
1. This module is suitable for indoors, do not use it outdoors.
2. The applied load must not exceed the rated voltage, current.
3. The wiring order cannot be wrong.
 
Specification:
 
1. Working voltage: 6.5 ~ 65VDC
2. Test voltage: 6.5 ~ 65VDC
3. Rated power: 20A / 2000W
4. Measurement accuracy: 1.0 grade